Mounting Motors Upside Down: The Pusher Configuration Defined

When constructing or modifying an FPV drone, one query that always comes up is: Can I mount my motors the other way up? The quick reply is sure, and this setup is named a pusher configuration. This implies the motors and propellers are flipped, pushing air downward relatively than pulling it.

A number of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further price to you) in the event you make a purchase order after clicking on one in every of these affiliate hyperlinks. This helps help the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra info.

Whereas this configuration has some benefits, significantly for cinematic FPV drones, it additionally comes with just a few downsides. On this information, I’ll break down how the pusher setup works, what you could contemplate when switching to it, and the way it impacts flight efficiency and sturdiness.

Additional Readings:

What Is a Pusher Configuration?

In a conventional FPV drone setup, motors are mounted on high of the arms with the propellers (props) pulling air downward.

In a pusher configuration, the motors are mounted the other way up, with propellers beneath the arms pushing air downward as an alternative.

This setup is often utilized in cinematic FPV drones to maintain the props out of the digital camera’s view. It’s additionally seen in some specialty drones the place aerodynamics or element placement advantages from this format.

Professionals and Cons of a Pusher Configuration

Professionals:

• Improved Aerodynamics and Effectivity – Some argue that having the arms above the propeller permits extra air to be moved for a similar energy, resulting in barely extra environment friendly flight.
• Higher Digicam Visibility – Because the propellers are mounted additional away from the digital camera, the props change into much less prone to seem in footage, making it a sexy choice for cinematic FPV drones.
• Extra Part Area – With the props beneath, there’s usually extra room on the highest plate for mounting parts like batteries, motion cameras, or different FPV gear.

Cons:

• Touchdown Challenges – Many drone frames are designed to land on their backside plate. With upside-down motors, the motors and props change into touchdown factors, which isn’t excellent for sturdiness. Subsequently you’ll in all probability want touchdown gear or taller prop guards to land on.
• Vulnerability to Particles when taking off – When taking off, the props in a pusher setup are nearer to the bottom, rising the possibility of getting obstructed by grime, grass, small rocks or carpet. That is particularly problematic for freestyle, racing, or tiny whoop drones that crash incessantly and takeoff from the identical spot.
• Reversing Motor Instructions – Switching to a pusher setup means reversing the motor spin path in Betaflight (or no matter flight controller software program you utilize), which provides further complexity throughout setup. Not very newbie pleasant.

The best way to Convert Your Drone to a Pusher Configuration

If you wish to change to a pusher setup, observe these steps:

1. Flip the Motors

• Unscrew and mount the motors the other way up.

2. Reverse Motor Rotation in Betaflight

• For the reason that motors at the moment are the other way up, they’ll spin in the wrong way, and you need to reverse it.
• To do that, change motor path within the ESC settings by following this information: https://oscarliang.com/change-motor-spin-direction-quadcopter/
• Then inform Betaflight the motors are spinning the wrong way by going to Betaflight Configurator → Motors Tab and allow “Motor Course is Reversed”.

3. Flip Over Propellers

• Take away and flip the props the other way up when reinstalling them.
• The vanguard ought to nonetheless be going through ahead within the path of journey, though the props at the moment are beneath the arms.

4. Take a look at Motor Course

• Use the Sliders within the Motors tab in Betaflight to substantiate all motors are spinning the right means earlier than arming the drone.

Is a Pusher Setup Proper for You?

The pusher configuration isn’t for everybody. Freestyle, racing and tiny whoop pilots who incessantly crash might discover it impractical resulting from propeller obstructions and tough landings. However, cinematic drone pilots searching for a cleaner digital camera view might profit from the setup.

Would you attempt a pusher setup in your drone? Let me know your ideas!